3Com 5500G-EI 스위치 CLI 매뉴얼
1. Consol 구성
a. Baud rate : 19200 bps
b. Data bit : 8bit
c. Parity bit : none
d. Stop bit : 1bit
2. Login
Username:admin
Password:
<5500G-EI>
3. System-view로 전환
<5500G-EI> system-view
System View: return to User View with Ctrl+Z.
4. Display
[5500G-EI] display ?
[5500G-EI] display mem
Unit 1
System Available Memory(bytes): 90875136
System Used Memory(bytes): 26083248
Used Rate: 28%
[5500G-EI] dis cpu
Unit 1
Board 0 CPU busy status:
7% in last 5 seconds
6% in last 1 minute
6% in last 5 minutes
[5500G-EI] dis var
3Com Corporation
SuperStack 4 Switch 5500G-EI Software Version 3Com OS V3.01.00s56p03
Copyright(c) 2004-2006 3Com Corporation and its licensors, All rights reserved
SuperStack 4 Switch 5500G-EI uptime is 0 week, 0 day, 1 hour, 30 minutes
System returned to ROM by power-on
3Com Switch 5500G-EI 24-Port with 1 MIPS Processor
128M bytes SDRAM
16384K bytes Flash Memory
Config Register points to FLASH
Hardware Version is REV.C
CPLD Version is 002
Bootrom Version is 312
[Subslot 0] 24GE+4SFP Hardware Version is REV.C
[Subslot 2] 2 STACK Hardware Version is REV.C
[5500G-EI] display current-configuration
[5500G-EI] dis saved-configuration
5. vlan 구성
[5500G-EI] dis vlan
The following VLANs exist:
1(default)
[5500G-EI] vlan 2
[5500G-EI] dis vlan
The following VLANs exist:
1(default), 2
[5500G-EI] dis vlan 1
VLAN ID: 1
VLAN Type: static
Route Interface: not configured
Description: VLAN 0001
Tagged Ports: none
Untagged Ports:
GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3
GigabitEthernet1/0/4 GigabitEthernet1/0/5 GigabitEthernet1/0/6
GigabitEthernet1/0/7 GigabitEthernet1/0/8 GigabitEthernet1/0/9
GigabitEthernet1/0/10 GigabitEthernet1/0/11 GigabitEthernet1/0/12
GigabitEthernet1/0/13 GigabitEthernet1/0/14 GigabitEthernet1/0/15
GigabitEthernet1/0/16 GigabitEthernet1/0/17 GigabitEthernet1/0/18
GigabitEthernet1/0/19 GigabitEthernet1/0/20 GigabitEthernet1/0/21
GigabitEthernet1/0/22 GigabitEthernet1/0/23 GigabitEthernet1/0/24
[5500G-EI] dis vlan 2
VLAN ID: 2
VLAN Type: static
Route Interface: not configured
Description: VLAN 0002
Tagged Ports: none
Untagged Ports: none
[5500G-EI] vlan 2
[5500G-EI-vlan2] port g 1/0/11 to g 1/0/20
[5500G-EI-vlan2] dis vlan 1
VLAN ID: 1
VLAN Type: static
Route Interface: not configured
Description: VLAN 0001
Tagged Ports: none
Untagged Ports:
GigabitEthernet1/0/1 GigabitEthernet1/0/2 GigabitEthernet1/0/3
GigabitEthernet1/0/4 GigabitEthernet1/0/5 GigabitEthernet1/0/6
GigabitEthernet1/0/7 GigabitEthernet1/0/8 GigabitEthernet1/0/9
GigabitEthernet1/0/10 GigabitEthernet1/0/21 GigabitEthernet1/0/22
GigabitEthernet1/0/23 GigabitEthernet1/0/24
[5500G-EI-vlan2] dis vlan 2
VLAN ID: 2
VLAN Type: static
Route Interface: not configured
Description: VLAN 0002
Tagged Ports: none
Untagged Ports:
GigabitEthernet1/0/11 GigabitEthernet1/0/12 GigabitEthernet1/0/13
GigabitEthernet1/0/14 GigabitEthernet1/0/15 GigabitEthernet1/0/16
GigabitEthernet1/0/17 GigabitEthernet1/0/18 GigabitEthernet1/0/19
GigabitEthernet1/0/20
[5500G-EI-vlan2] undo port g 1/0/15 to g 1/0/20
[5500G-EI-vlan2] dis vlan 2
VLAN ID: 2
VLAN Type: static
Route Interface: not configured
Description: VLAN 0002
Tagged Ports: none
Untagged Ports:
GigabitEthernet1/0/11 GigabitEthernet1/0/12 GigabitEthernet1/0/13
GigabitEthernet1/0/14
[5500G-EI] undo vlan 2
6. Configuring Port
[5500G-EI] display interface GigabitEthernet 1/0/1
[5500G-EI] interface g 1/0/1
[5500G-EI-GigabitEthernet1/0/1] speed 100
[5500G-EI-GigabitEthernet1/0/1] duplex full
[5500G-EI-GigabitEthernet1/0/1] duplex half
[5500G-EI-GigabitEthernet1/0/1] dis int g 1/0/1
GigabitEthernet1/0/1 current state : DOWN
IP sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 0012-a9bf-4241
media type twisted pair, loopback not set
port hardware type is 1000_BASE_T
100Mbps-speed mode, half-duplex mode
[5500G-EI-GigabitEthernet1/0/1] speed auto
[5500G-EI-GigabitEthernet1/0/1] duplex auto
< Port Enable >
<5500G-EI> system-view
[5500G-EI] int g 1/0/24
[5500G-EI-GigabitEthernet1/0/24] undo shut
[5500G-EI-GigabitEthernet1/0/24] undo shutdown
7. 802.1Q Port Trunk link 설정
[5500G-EI] int g 1/0/1
[5500G-EI-GigabitEthernet1/0/1] port link-type trunk
[5500G-EI-GigabitEthernet1/0/1] port trunk permit vlan all
please wait........................................Done.
[5500G-EI-GigabitEthernet1/0/1] dis vlan 2
VLAN ID: 2
VLAN Type: static
Route Interface: not configured
Description: VLAN 0002
Tagged Ports:
GigabitEthernet1/0/1
Untagged Ports:
GigabitEthernet1/0/10 GigabitEthernet1/0/11 GigabitEthernet1/0/12
[5500G-EI-GigabitEthernet1/0/1] undo port trunk permit vlan all
8. VLAN에 IP Interface 설정하기
[5500G-EI] int vlan 1
[5500G-EI-VLAN-interface1] ip address 192.168.0.85 24
[5500G-EI-VLAN-interface1] ip route 0.0.0.0 0.0.0.0 192.168.0.1
[5500G-EI] dis vlan 1
VLAN ID: 1
VLAN Type: static
Route Interface: configured
IP Address: 192.168.0.85
Subnet Mask: 255.255.255.0
Description: VLAN 0001
Tagged Ports: none
[5500G-EI] display ip interface brief
*down: administratively down
(I): lookback
(s): spoofing
interface IP Address Physical protocol Description
Vlan-interface1 192.168.0.85 down down Vlan-inte....
9. Port-mirroring
[5500G-EI] int g 1/0/1
[5500G-EI-GigabitEthernet1/0/1] mirroring-port ?
both Mirror the inbound and outbound packets of the interface
inbound Mirror the inbound packets of the interface
outbound Mirror the outbound packets of the interface
[5500G-EI-GigabitEthernet1/0/1] mirroring-port both
[5500G-EI-GigabitEthernet1/0/1] int g 1/0/2
[5500G-EI-GigabitEthernet1/0/2] monitor-port
Setting the monitor port on Gigabitethernet1.0.2 succeeded!
10. Configure Save & Configure Default
<5500G-EI> save
The configuration will be written to the device.
Are you sure?[Y/N] y
Please input the file name(*.cfg)(To leave the existing filename unchanged press
the enter key):
Now saving current configuration to the device.
Saving configuration. Please wait............
Unit1 save configuration flash:/3ComOScfg.cfg successfully
<5500g-EI> reset
<5500g-EI> reset sa
<5500g-EI> reset saved-configuration
The saved configuration will be erased.
Are you sure?[Y/N] y
